某加油车液压系统的温升控制

温升控制是液压系统设计的重要内容，其效果好坏直接影响着液压系统工作的可靠性。针对某加油车液压系统连续工作时间长、结构紧凑等特点，设计了一种新型的“油冷蛇形管”式液压油温控制系统，即将加油车自身输转的柴油导入液压油箱内的冷却管，对液压油实施强制冷却。经试验验证，取得了良好的温控效果。该方法取消了冷却水源，简化了结构，并达到了控制油温的目的，对类似系统的设计具有较好的借鉴意义。     

组合回转壳体动力分析的混合界面法

组合回转壳体在工程结构系统中大量存在,对它们进行动力分析是十分必要的。介绍了混合界面法的主要原理和在组合回转壳体结构系统动力分析中的应用,并用两个例题作了分析和计算,证明是成功的。该方法可推广到其它复杂系统结构的动力分析。     

New heuristic methods for the capacitated multi‐facility Weber problem

In this paper we consider the capacitated multi‐facility Weber problem with the Euclidean, squared Euclidean, and ?_p‐distances. This problem is concerned with locating m capacitated facilities in the Euclidean plane to satisfy the demand of n customers with the minimum total transportation cost. The demand and location of each customer are known a priori and the transportation cost between customers and facilities is proportional to the distance between them. We first present a mixed integer linear programming approximation of the problem. We then propose new heuristic solution methods based on this approximation. Computational results on benchmark instances indicate that the new methods are both accurate and efficient. © 2006 Wiley Periodicals, Inc. Naval Research Logistics 2006     

Subspace dynamic‐simplex linear interpolation search for mixed‐integer black‐box optimization problems

Design and management of complex systems with both integer and continuous decision variables can be guided using mixed‐integer optimization models and analysis. We propose a new mixed‐integer black‐box optimization (MIBO) method, subspace dynamic‐simplex linear interpolation search (SD‐SLIS), for decision making problems in which system performance can only be evaluated with a computer black‐box model. Through a sequence of gradient‐type local searches in subspaces of solution space, SD‐SLIS is particularly efficient for such MIBO problems with scaling issues. We discuss the convergence conditions and properties of SD‐SLIS algorithms for a class of MIBO problems. Under mild conditions, SD‐SLIS is proved to converge to a stationary solution asymptotically. We apply SD‐SLIS to six example problems including two MIBO problems associated with petroleum field development projects. The algorithm performance of SD‐SLIS is compared with that of a state‐of‐the‐art direct‐search method, NOMAD, and that of a full space simplex interpolation search, Full‐SLIS. The numerical results suggest that SD‐SLIS solves the example problems efficiently and outperforms the compared methods for most of the example cases. © 2017 Wiley Periodicals, Inc. Naval Research Logistics 64: 305–322, 2017     

一种新的柴油机润滑油发射光谱数据综合评价方法

对两台船舶主柴油机润滑油进行了长期监测,应用原子发射光谱仪对采集的36个油样进行了测试。采用基于熵权法的模糊综合评价对各元素进行了权重赋值,并依据权重选取11个元素中的5个主要作用元素进行了数据综合评价,按照正常、注意、警告、异常4个状态对装备磨损状态进行了分类。研究结果表明:所提出的油液原子发射光谱数据综合评价方法能够客观、准确地获取装备磨损状态,其评价结果与实际磨损状态相符,为装备的使用与维护提供了有效的技术依据。     

基于ANSYS的油罐拱顶与罐壁关联性分析

针对油罐拱顶与罐壁上部容易出现失稳变形的实际问题,基于ANSYS建立了油罐有限元模型,对油罐结构稳定性进行数值模拟,探讨加载关联性和结构关联性对均匀外压作用下油罐稳定性的影响。结果表明:分析油罐结构稳定性时,对于给定尺寸的油罐,失稳发生在结构较薄弱部位;拱顶和罐壁可独立加载求解临界载荷,取较小值作为油罐的临界载荷;油罐的失稳分析要考虑拱顶与罐壁间相互作用对总体临界载荷的影响。研究结果可为基于有限元法的油罐稳定性设计和分析提供一定参考。     

水顶油顺序输送油水混合模型研究

顺序输送是利用一条管道输送多种油品,因其可最大限度发挥管道输送潜能而被广泛应用。按照前后行液体不同可分为水顶油、油顶水和不同油品间顺序输送等,其中水顶油顺序输送主要用于管道撤收前的排空作业。对水顶油顺序输送油水混合过程进行了分析,建立了油水混合模型,利用CFD对其进行数值求解,并将仿真结果与前期理论分析进行了对比,两者吻合较好。所得结论可为机动管线水顶油排空作业提供科学指导。     

基于油液分析的装备状态多阶段组合预测模型

状态预测是状态维修的关键步骤之一。针对装备状态变化规律复杂、特点难易准确掌握的关键问题,以延时时间概念和两阶段预知模型为基础,提出了根据不同阶段特点采用不同预测方法的多阶段组合预测模型。通过油液分析及其相关规定,对装备运行阶段进行了具体划分,给出了适应各阶段特点的预测方法。最后,通过实例验证了该模型的有效性。     

Some comparisons of residual life of coherent systems with exchangeable components

Most of the research, on the study of the reliability properties of technical systems, assume that the components of the system operate independently. However, in real life situation, it is more reasonable to assume that there is dependency among the components of the system. In this article, we give sufficient conditions based on the signature and the joint distribution of component lifetimes to obtain stochastic ordering results for coherent and mixed systems with exchangeable components. Some stochastic orders on dynamic (or conditional) signature of coherent systems are also provided. © 2014 Wiley Periodicals, Inc. Naval Research Logistics 61: 549–556, 2014     

A balancing problem for mixed model assembly lines with a paced moving conveyor

We state a balancing problem for mixed model assembly lines with a paced moving conveyor as: Given the daily assembling sequence of the models, the tasks of each model, the precedence relations among the tasks, and the operations parameters of the assembly line, assign the tasks of the models to the workstations so as to minimize the total overload time. Several characteristics of the problem are investigated. A line‐balancing heuristic is proposed based on a lower bound of the total overload time. A practical procedure is provided for estimating the deviation of any given line‐balance solution from the theoretical optimum. Numerical examples are given to illustrate the methodology. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004.